Automated doors for the garage have quickly become crucial. It’s easy to overlook that these consequently decay and need replacing parts. That’s because homeowners rely so heavily on them until they abruptly cease operating.
The part that requires replacement or repair frequently is a broken garage door spring. It performs the bulk of the lifting every time the door is opened. But how much does it cost to replace a garage door?
Replacing a garage door spring costs about $150 to $350. Both the materials and labor costs are included in this price. The spring can alone cost $35 to $75 each. If you wish to use commercial springs, they cost you up to $300 each.
Garage door spring replacement prices are affected by several factors, including the number of doors, their size, type, and quantity, as well as labor costs and location.
But you might not know where to start. We are here to answer all your questions through this article. Let’s jump in!
|Torsion Springs||$75 – $150|
|Extension Spring||$50 – $100|
|Industrial garage door springs||$100 – $500|
|Double door springs||$200 – $400|
How To Know If I Need A New Garage Door Spring?
Since they are in charge of reducing the door’s weight, the garage door springs are subjected to a lot of tension.
Gravity causes the large door to lower the earth but also presses on enormous load-bearing springs, creating tension. When the time comes, it is much simpler to open the door again because of the pressure in the springs.
Some signs show that you need to replace the old garage door springs with a new one. Such as:
- The door won’t open, despite the motor operating
- Too quickly, the door closes
- The door droops unevenly
- Squeaky metal components
- The door slams on the ground instead of locking naturally
- The door won’t remain open
- The cables are loose or broken
- There is a loud bang or noise when functioning
- Too slowly, the door opens and closes
- There are obvious gaps in the springs
If you witness any of these signs, do not ignore them. Replace the spring as soon as possible. Otherwise, it may cost you to replace the whole door.
Average Garage Door Spring Cost
A garage door spring replacement typically costs $250. Costs for both the required supplies and labor are included in this amount.
If you DIY, you will save the labor cost required. But otherwise, in most cases, the total cost of replacing a garage door will be $250. The cost varies for different factors. That’s why the cost varies from $150 to $350.
You may have to pay up to $500 for installations that need other parts changed or have several doors. However, you might only need to balance the door and oil the springs, which will only cost you $50 to $100.
Repair almost always entails replacement. The cost of materials, such as springs, brackets, and hardware, ranges from $30 to $200. And labor costs between $75 and $150.
Factors Affecting Garage Door Spring Replacing Cost
The cost of replacing springs can vary based on some significant factors. Such as:
The cost of hiring a garage door contractor will vary depending on demand and supply. You can anticipate reduced prices if you live in a location with a large selection of contractors instead of one with fewer options.
Type of Door
The cost is also determined by the type of spring that must be replaced. The springs are more likely to break on an industrial garage door because they are bigger, heavier, and utilized more consistently than most household doors.
Industrial garage door springs cost between $100 and $500, plus $150 to $300 for labor.
Numbers of Doors
The cost of replacing the springs increases with the number of garage doors, though you can frequently get a discount for more than one. Replace both springs on a garage door, even if there is just one break.
Replacement springs for double garage doors range from $200 to $400.
You will have to pay for new brackets, springs, and hardware if you decide to replace the springs.
With a double garage door, a pair of two springs typically range in price from $30 to $200.Thus, it will be less expensive.
Torsion spring replacement costs range from $75 to $150 per spring, parts included. Parts and labor for extension springs range from $50 to $100 per spring.
Since garage door springs are difficult to repair, working with a reputable company with extensive experience is essential. Typically, labor costs range from $75 to $150 per service call.
Switching Spring Types
Transitioning from extension to torsion garage door springs costs between $400 and $800. If you’re worried about the absence of safety cables on extension springs or want springs that can last longer, this adjustment may be a wise investment.
To replace cables and springs, budget between $175 and $450.
Garage Door Spring Replacement Cost By Types
First, you need to know the type of your garage door spring, just like it is essential to see the illness before taking medicine. So, determine whether your garage door employs torsion or expansion springs.
Torsion springs are more difficult to see since they are coiled around torsion tubes, often mounted on the wall above the garage door. They are parallel to the side of the entrance but perpendicular to the tracks.
These springs require more effort to install but are safer since they are wrapped around the tubes even in the event of a rupture.
Since the Torsion spring continues to be under intense pressure while the garage is shut, replacing torsion springs is one of the riskier spring replacement procedures.
They extend and twist firmly to open or close the door and are fastened to the side wall of the building. Torsion springs last 10,000 and 20,000 cycles, in other words, 8-15 years, longer than extension springs since they are more robust.
Replacement of Torsion springs ranges from $75-$150 each spring, materials included. Each set of springs costs $30 to $100.
Extension springs are inserted adjacent to the rails. Most older garage door systems use extension springs. They pose a greater risk of damage or injury if one spring fails, making them less secure.
These springs are simpler to install. They are predicted to have life spans between 8,000 and 15,000 cycles or 7 to 12 years, so they won’t last quite as long. The majority have a 3–5 year warranty.
The price of labor and supplies to replace the Extension spring ranges from $50 to $100. Just the springs cost $15 to $45.
Cost Analysis – Spring Replacement Vs. Whole Garage Door Replacement
When your garage door suddenly stops functioning correctly, you start to worry about how much it will cost to fix it. You might even be concerned that you need to substitute your door entirely.
Fortunately, a damaged spring is usually to blame for a malfunctioning garage door, and a skilled professional can easily replace it.
When various garage door components require repair or replacement, complete garage door replacement is necessary. A specialist might be able to fix the one or two damaged panels on your paneled garage door.
However, the entire garage door will need to be replaced if the door, tracks, and cables are all broken. This will also increase your cost.
A new garage door spring will cost you $150 to $350. On the other hand, a brand new garage door will cost from $752 to $1634. Now it’s your choice to decide which one to choose.
Cost Analysis – DIY Or Hiring A Professional?
If your garage door is made of an extension spring, you may be able to replace the spring system in some cases. A stepladder, box wrenches, two C-clamps, fresh springs, and a bathroom scale are required.
First, measure the door’s weight and height, and unbolt the pulley. After that, unplug the safety cables. Lastly, it would be best if you replaced each spring sequentially.
For torsion springs, it is usually preferable to contact a specialist. These springs are hazardous due to their high tension and disbanding, and replacing these is more complex than extension springs.
Replacement spring labor costs are typically between $50 and $150. The expert can usually finish the task in 30 to 60 minutes.
Replacing Cost Vs. Repairing Cost
Repairing a spring is less expensive than buying brand-new ones, which cost more.
Depending on the style of your garage door, the average cost to repair a spring is between $180 and $200. The cost would range from $100 to $350 when an installer disassembled the door brackets to fix the springs.
Repairing, however, is not always the answer. In these circumstances, a replacement is the only choice left. The situation with door springs is the same.
For a professional to replace garage door springs effectively costs between $180 and $350. The price includes the cost of the torsion and extension springs as well as labor, which ranges from $40 to $70, depending on the region and the business.
How Can You Save On Replacing a Garage Door Spring?
Even while changing springs isn’t an expensive home improvement project compared to others, you might still desire money-saving advice. Here are a few actions.
- Verify if the issue is with the springs if you don’t find a destroyed spring.
- When you initially notice the issue, submit a service request. It can get worse by trying to use the system again or yank the door shut or open.
- Ensure the contractor you pick knows how to replace the type of springs the garage door utilizes.
- Keep an eye on the spring lubrication and the garage door system’s maintenance.
- Choosing higher-quality components that will last longer is preferable because the cost differential between high-quality and low-quality springs is insignificant.
Why Do Garage Door Springs Break And Need Replacement?
The causes of garage door spring failure and solutions for extending their validity are listed below.
Any moisture that comes into touch with the spring coils causes rust and weakening. Spraying the springs with WD-40 White Lithium Grease or a silicone-based lubricant once a year will prevent rust.
The metal coils used in the cheapest springs are of inferior quality and tend to break quicker. Purchasing higher-quality springs will save you money by reducing repair costs in the long run.
Lack of Maintenance
Every year, open the garage door halfway to check the balance of the springs. The springs remain in good shape if the door remains in the middle.
The springs must be maintained if the door keeps rising or falling or if one side rises faster than the other.
When the winter temperatures are extremely low, the metal springs compress and are more likely to break. The springs are protected from the cold by using a heater in the garage and closing the doors.
Wear and Tear
The garage door’s springs deteriorate more quickly the more you open and close it. Compared to standard springs, which only offer 10,000 cycles, investing in high-cycle springs offers 50,000 cycles.
Frequently Asked Questions (FAQs)
How long is the lifespan of a garage door spring?
Your spring’s kind will determine what happens. Extension springs should last seven to twelve years, while torsion springs eight to fifteen. Most springs can survive their entire lifespan with proper care.
Can I change my garage door spring by myself?
Yes, you can change your garage door spring by yourself. There are kits available for homeowners who want to replace their garage door springs.
But you should be aware that doing so is not recommended due to the great danger of harm or even death while working with springs under intense pressure. You can be in a challenging situation without the proper equipment and knowledge.
Is it possible for a garage door to operate without springs?
NO! The garage door can never work without springs. So repair or replace them as soon as possible.
Even premium springs eventually rust, corrode, or break, and a garage door spring lasts up to 15 years. Fortunately, spring replacement is not particularly expensive. And saving money is not always a good idea because better things cost more.
In this article about how much it costs to replace a garage door spring, we hope you can find both the illness and the medicine. So, do not sit idly anymore, and get back to replace your broken garage door spring!